1959-1960 Cadillac Sheetmetal Replacement Parts

1959 - 1960 Cadillac 2 Door Outer Rocker Panels

1959 - 1960 Cadillac 2 Door Outer Rocker Panels

Outer rocker panels for the 2 door coupe 1959 and 1960 Cadillac.  19 gage steel, made right here in AMERICA!     Many of our parts are MADE TO ORDER. Please allow 10-15 days for fabrication and shipping. ..

$65.00
1959 - 1960 Cadillac 4 Door Rocker Panels

1959 - 1960 Cadillac 4 Door Rocker Panels

Outer rockers for the four door 1959-1960 Cadillacs.  19 gage and made in AMERICA!        Many of our parts are MADE TO ORDER. Please allow 10-15 days for fabrication and shipping. ..

$65.00
1959 - 1960 Cadillac Complete Trunk Floor Kit

1959 - 1960 Cadillac Complete Trunk Floor Kit

Every peice you need to replace that rotted out trunk!  19 gage steel, made in AMERICA, and half the price* of the overseas kit!        *before shipping, handling, insurance and customs fees     Many of our parts are MADE TO ORDER. Please allow 10-15 days for fabrication and shipping. ..

$655.00
1959 - 1960 Cadillac Front Fender Patches

1959 - 1960 Cadillac Front Fender Patches

19 gauge sheet metal, expertly handcrafted in Finland. Finally a replacement sheetmetal piece that fit and had PLENTY of coverage (goes almost up to the belt line of the car).  These are the most commonly rotted out areas on the 1959 and 1960 Cadillac.  These pieces provide coverage from the rear edge of the Front Fender to the wheel well of the front fender.  These parts will fit 1959 and 1960 Cadillacs ONLY.  Will fit 2 door, convertible or 4 door models. ..

$190.00
1959 - 1960 Cadillac Front Floor Panels

1959 - 1960 Cadillac Front Floor Panels

19 gage steele made right here in the USA!        Many of our parts are MADE TO ORDER. Please allow 10-15 days for fabrication and shipping. ..

$155.00
1959 - 1960 Cadillac Front Floor Panels

1959 - 1960 Cadillac Front Floor Panels

19 gauge sheet metal, expertly handcrafted in Finland. Second most common pieces to rot out on the Cadillacs!   These pieces provide coverage from the transmission tunnel to the toe panels.  Toe panels available seperatley.   They are for 1959 and 1960 Cadillacs.  Will fit 2 door, convertible or 4 door models. ..

$220.00
1959 - 1960 Cadillac Hinge to Hood Bolt Plates

1959 - 1960 Cadillac Hinge to Hood Bolt Plates

New product alert! We have created the first 1959-1960 Hinge to Hood bolt plates! NOBODY MAKES THESE These parts are typically cadnium plated from the factory, but over time, they rust away! Made from 304 stainless steel, lazer cut and welded right here in the good old USA!  Factory barely tackwelded the retaining nuts on all four corners, we have nearly 50% of the nut surface area welded!    Sold in pairs of 2!..

$40.00
1959 - 1960 Cadillac Main Trunk Floor

1959 - 1960 Cadillac Main Trunk Floor

Only the center piece of the trunk floor, if the side piece extentions are all still in-tact.      Many of our parts are MADE TO ORDER. Please allow 10-15 days for fabrication and shipping. ..

$355.00
1959 - 1960 Cadillac Rear Floor Panels

1959 - 1960 Cadillac Rear Floor Panels

19 gage steel, made right here in the old USA!       Many of our parts are MADE TO ORDER. Please allow 10-15 days for fabrication and shipping. ..

$155.00
1959 - 1960 Cadillac Rear Floor Panels

1959 - 1960 Cadillac Rear Floor Panels

19 gauge sheet metal, expertly handcrafted in Finland. Second most common pieces to rot out on the Cadillacs!   These pieces provide coverage of the lowest part of the floor pans, where all the water collects.    Extensions pictured AVAILABLE SEPERATELY.   They are for 1959 and 1960 Cadillacs.  Will fit 2 door, convertible or 4 door models. ..

$240.00
1959 - 1960 Cadillac Rocker Extensions

1959 - 1960 Cadillac Rocker Extensions

19 gauge sheet metal, expertly handcrafted in Finland.  These pieces provide replacement for the extension piece UNDER the rocker panel.   They are two separate pieces, one fitting over the other.  This is a very intricate piece! These parts are not seen unless the rocker is removed.  If your rockers are rotted, chances are the extensions could use replacement as well.  Theese will fit 1959 and 1960 Cadillacs.  Will fit 2 door, convertible or 4 door models. ..

$210.00
1959 - 1960 Cadillac Rocker Panels

1959 - 1960 Cadillac Rocker Panels

19 gauge sheet metal, expertly handcrafted in Finland.  These pieces provide coverage from the rear edge of the front fender to the rear rear quarter.    These will fit 1959-1960 Cadillacs.  Will fit 2 door, convertible or 4 door models. The four door model will be longer than the two door models, possibly necessitating two pairs of rockers per side, if the entire rocker needs to be replaced. ..

$300.00
1959 Cadillac LED Packages

1959 Cadillac LED Packages

We have done all the running around for you! We know every bulb by part number and can help you replace every last, single bulb on your car, inside and out!   Replace all of your outdated, fast failing bulbs with our custom LED packages!  Our most basic package (intended for aftermaket guage cluster users) includes: 100% glass high and low beam headlights (non halo, stock appearing)  Front fog lights and blinkers Front blinker indicators (inside the gunsights)  Interior lights for: Dome, Map and Glovebox (we can do sets of factory gauges, but they aren't included with this kit) Tail fins, tail lights, backup lights and license plate light AND, most importantly, an HD Flasher module (don't worry, it's plug and play too) to make everything work as it should.  There are more packages available, just ask! ..

$529.00
1959 Cadillac Lower Rear Quarters

1959 Cadillac Lower Rear Quarters

19 gauge sheet metal, expertly handcrafted in Finland.  These pieces provide coverage from the rear edge of the wheel well to the rear bumper.  They are for 1959 Cadillacs ONLY.  Will fit 2 door, convertible or 4 door models. ..

$450.00
1959-1960 Cadillac Above Wheel Well Panels

1959-1960 Cadillac Above Wheel Well Panels

19 gauge sheet metal, expertly handcrafted in Finland.  These pieces provide coverage above the rear wheel well.  They are for 1959-1960 Cadillacs ONLY.  Will fit 2 door, convertible or 4 door models. ..

$90.00
1959-1960 Cadillac Door to Fender Panels

1959-1960 Cadillac Door to Fender Panels

19 gauge sheet metal, expertly handcrafted in Finland.  These pieces provide coverage from the rear edge of the door to the front edge of the wheel well.  They are for 1959-1960 Cadillac 2 door coupes ONLY.  ..

$300.00
1959-1960 Inner Rocker Panels

1959-1960 Inner Rocker Panels

19 gage of sheetmetal goodness!  Made right here in the USA!         Many of our parts are MADE TO ORDER. Please allow 10-15 days for fabrication and shipping. ..

$85.00
1960 Cadillac LED Packages!

1960 Cadillac LED Packages!

We have done all the running around for you! We know every bulb by part number and can help you replace every last, single bulb on your car, inside and out!   Replace all of your outdated, fast failing bulbs with our custom LED packages!  Our most basic package (intended for aftermaket guage cluster users) includes: 100% glass high and low beam headlights (non halo, stock appearing)  Front fog lights and blinkers Front blinker indicators (inside the gunsights)  Interior lights for: Dome, Map and Glovebox (we can do sets of factory gauges, but they aren't included with this kit) Tail fins, tail lights, backup lights and license plate light AND, most importantly, an HD Flasher module (don't worry, it's plug and play too) to make everything work as it should.  There are more packages available, just ask! ..

$507.00
1960 Cadillac Lower Rear Quarters

1960 Cadillac Lower Rear Quarters

19 gauge sheet metal, expertly handcrafted in Finland.  These pieces provide coverage from the rear edge of the wheel well to the rear bumper.  They are for 1960 Cadillacs ONLY.  Will fit 2 door, convertible or 4 door models. ..

$425.00
Showing 1 to 19 of 19 (1 Pages)